Schlage L9000 series electrified mortise lock line allows for remote key-less access and egress control for heavy use applications where security and safety is critical, we offer multiple functions and voltages to meet your requirements. Common applications include stairwell doors, lobby entrances, computer rooms, classrooms, interior and exterior doors.
Schlage ML480 - Entrance w/deadbolt: (fail safe/fail secure): Outside lever locked (EL) or unlocked (EU) electronically. Latchbolt and deadbolt retracted by key outside or lever inside. Switched power allows outside lever to retract latchbolt and deadbolt. Inside lever is always free for immediate egress
Continuous duty solenoids allow for “continuously on” applications such as Fail Safe or an unlock cycle
Plug-in bridge rectifier that allows for an AC or DC power source
Low current draw
No hassle 3-Year Warranty
Operating Voltage - 12 or 24VAC/DC (+or- 10%) (must specify 12 or 24 volts when ordering)
Available Fail Safe (Electrically Locked) or Fail Secure (Electrically Unlocked)
REXBYPASS - Request to Exit Bypass switch available (on all functions): request to exit (REX) switch will be bypassed when the lock is in the unlocked state, preventing false REX signals.
EZ-REX-SCH - Field installable Request to Exit or AE Switch
REX - Request to Exit or AE switch available (on all functions)
LBM - Latchbolt Monitor switch available (storeroom only)
DPS - Door Position switch available (storeroom only)
DBM - Deadbolt Monitor switch available (on ML53 only)
SLM - Solenoid Monitor switch available (storeroom only)
SCM - Security Monitor switch available (storeroom only)
CRU2 - Current Reduction Unit to improve solenoid life in “continuously on” applications
CRU2i - The intelligent CRU2: automatically detects DC input voltage between 12 to 30 volts and converts it to operate our 12V locks. Additionally, it adjusts the current to the solenoid allowing the lockset to run cooler and last longer without any manual adjustments.