Select-Hinges SL300 Pin & Barrel Concealed Continuous Hinges. Stainless steel. 1/8" door inset. For 1-3/4" doors weighing up to 600 lb., 48" max. door width. SL300 pin & barrel continuous hinges are BHMA Grade 1 certified.
SELECT Pin & Barrel Continuous Hinges
SELECT Pin & Barrel Continuous Hinges offer the classic look of stainless steel for special applications (carbon steel also available). And because they are continuous hinges, they outperform most entrance components by distributing door weight along the full length of the door frame.
MATERIAL: 14 gauge 304 stainless steel with 3/16" diameter 304 stainless pin. Long-life nylon medical bearings.
LOAD/FREQUENCY: For 1-3/4" doors, 48" wide (max.), weighing up to 400 pounds (medium-frequency) without frame or door reinforcement; up to 600 pounds (low-frequency) without frame or door reinforcement.
Lengths79" / 83" / 85" / 95" / 119". SELECT hinges are normally 1" shorter than actual opening height. Custom lengths available.
Hinge Duty Unless otherwise noted, all SELECT brand Pin & Barrel Continuous Hinges are designed for medium-frequency doors up to 400 lb. or low-frequency doors up to 600 lb. (4 ft. maximum door width).
Standard Finishes US32D satin stainless steel (630)
Fire Rating 3-hr. Underwriters Laboratories rating without fire pins or studs, tested to meet the Positive pressure requirements of UL10C, and in accordance with UBC 7.2 (1997). Standard on all SELECT Pin & Barrel Continuous Hinges except Toilet Partition hinges.
Dust-Free (Medical) Bearings Dust-free (medical) flanged double bearings are standard on all SELECT Pin & Barrel Continuous Hinges except Toilet Partition hinges.
Adjusta-Screw™ Fasteners Available for some models in order to correct frame fit variances up to 3/8".
CLOSERS: Conventional overhead surface, concealed sliding arm overhead or floor closers may be used with SELECT hinges. Pivot-type floor closers (with a fixed, conflicting center pivot) must be replaced.
Grade 1 With the exception of Toilet Partition hinges, all SELECT Pin & Barrel Continuous Hinges are BHMA Grade 1 certified.
Pin & Barrel Warranty
SELECT brand Pin & Barrel Continuous Hinges are guaranteed to be free of defects in materials and workmanship for a period of 25 years. No claims for faulty or improper installation, consequent damages, repairs or back charges will be allowed. This warranty does not cover defects or damage resulting from vandalism, abuse, improper maintenance, improper storage, shipping or handling, alteration or removal of the factory-applied lubricant, anodizing or painting of product in the field.
All pin & barrel hinges are covered by a 25-year warranty to be free of defects in material and workmanship.