Select Hinges SL309 Pin & Barrel Full Surface Continuous Hinges. Stainless steel hinge with swing-clear action. Tamper-resistant door leaf cover. 1/8" door inset. For 1-3/4" doors weighing up to 600 lb., 48" max. door width. SL309 pin & barrel continuous hinges are BHMA Grade 1 certified.
SELECT Pin & Barrel Continuous Hinges
SELECT Pin & Barrel Continuous Hinges offer the classic look of stainless steel for special applications (carbon steel also available). And because they are continuous hinges, they outperform most entrance components by distributing door weight along the full length of the doorframe.
MATERIAL: 14 gauge 304 stainless steel barrel with 3/16" diameter 304 stainless pin. Long-life nylon medical bearings.
LENGTHS: 79", 83", 85", 95" and 119" lengths standard for nominal door heights. Custom lengths are available.
LOAD/FREQUENCY: For 1-3/4" doors, 48" wide (max.), weighing up to 400 pounds (medium-frequency) without frame or door reinforcement; up to 600 pounds (low-frequency) without frame or door reinforcement.
FINISH: US32D satin stainless steel (630).
CLOSERS: Conventional overhead surface, concealed sliding arm overhead or floor closers may be used with SELECT hinges. Pivot-type floor closers (with a fixed, conflicting center pivot) must be replaced.
Fire Rating 3-hr. Underwriters Laboratories rating without fire pins or studs, tested to meet the Positive pressure requirements of UL10C, and in accordance with UBC 7.2 (1997). Standard on all SELECT Pin & Barrel Continuous Hinges except Toilet Partition hinges.
Dust-Free (Medical) Bearings Dust-free (medical) flanged double bearings are standard on all SELECT Pin & Barrel Continuous Hinges except Toilet Partition hinges.
Adjusta-Screw™ Fasteners Available for some models in order to correct frame fit variances up to 3/8".
Grade 1 With the exception of Toilet Partition hinges, all SELECT Pin & Barrel Continuous Hinges are BHMA Grade 1 certified.
Pin & Barrel Warranty
SELECT brand Pin & Barrel Continuous Hinges are guaranteed to be free of defects in materials and workmanship for a period of 25 years. No claims for faulty or improper installation, consequent damages, repairs or back charges will be allowed. This warranty does not cover defects or damage resulting from vandalism, abuse, improper maintenance, improper storage, shipping or handling, alteration or removal of the factory-applied lubricant, anodizing or painting of product in the field.
All pin & barrel hinges are covered by a 25-year warranty to be free of defects in material and workmanship.